NL
EN 
DE 
FR 
V0 fiber blowing machine for cable Ø 0,8-6mm and duct Ø 3-16mm
Extremely compact electrically operated fiber blowing machine optimized for FTTX installation of blown fiber (EPFU) and micro/nano cables, from 0,8 to 6 mm into duct from 3 to 16 mm. A full digital control system with soft- start, electronic fiber security, memory functions, combined with high speed possibility makes the machine very easy and effective to use. Can be operated directly from its case.
Specification
▪ Electrically operated. Battery connected. Optional power supply.
▪ Allows installation in a larger duct with a smaller compressor.
▪ Electronic stopping/slipping protection within 250 ms.
▪ Gentle operation, reduced cable pull with the aid of continuously variable pushing force.
▪ Forward and reverse function.
▪ Display for current speed, distance, pushing force pressure and duct air temp.
▪ Max. speed: 250 m/min.
▪ Stepless pushing force on cable up to: 60 N.
▪ Adjustable clamping force.
▪ Works with JetLogger (electronic documentation system).
▪ Metal drive wheel for < 2.5 mm cabel.
▪ Softstart: enables an even smoother start protecting the fiber.
▪ Memory: the last inserted data like pushing force will stay in the memory even if the device will be switched off or the battery need to be exchanged.
▪ Service info: memory of total milage/distance since machine taken into operation.
▪ Duct air temp: display showing the air temperature injected into the duct.
Standard configuration
▪ Transport case
▪ 3 drive wheels: 1 x with rubber 0,8-3mm, 1 x for 3,0-4,5mm, 1 x for 4,5-6,5mm
▪ Battery charger 230 V
▪ 2 batteries
▪ 1 bottle micro duct lube
▪ Service kit
Optional accessories
▪ Cable inlet guides.
▪ 110/240 V power supply. No need to charge or change batteries.
▪ Table/Tripod bracket. For safe installation on working table.
▪ Jetlogger: electronic documentation system.
▪ Metal drive wheel for < 2.5 mm cable.
▪ External cable guide for V0-series case.
▪ 10 m airhose 3/8 ”.
▪ Cable seals.
▪ Jetair 100270 compressor.
Extremely compact electrically operated fiber blowing machine optimized for FTTX installation of blown fiber (EPFU) and micro/nano cables, from 0,8 to 6 mm into duct from 3 to 16 mm. A full digital control system with soft- start, electronic fiber security, memory functions, combined with high speed possibility makes the machine very easy and effective to use. Can be operated directly from its case.
Specification
▪ Electrically operated. Battery connected. Optional power supply.
▪ Allows installation in a larger duct with a smaller compressor.
▪ Electronic stopping/slipping protection within 250 ms.
▪ Gentle operation, reduced cable pull with the aid of continuously variable pushing force.
▪ Forward and reverse function.
▪ Display for current speed, distance, pushing force pressure and duct air temp.
▪ Max. speed: 250 m/min.
▪ Stepless pushing force on cable up to: 60 N.
▪ Adjustable clamping force.
▪ Works with JetLogger (electronic documentation system).
▪ Metal drive wheel for < 2.5 mm cabel.
▪ Softstart: enables an even smoother start protecting the fiber.
▪ Memory: the last inserted data like pushing force will stay in the memory even if the device will be switched off or the battery need to be exchanged.
▪ Service info: memory of total milage/distance since machine taken into operation.
▪ Duct air temp: display showing the air temperature injected into the duct.
Standard configuration
▪ Transport case
▪ 3 drive wheels: 1 x with rubber 0,8-3mm, 1 x for 3,0-4,5mm, 1 x for 4,5-6,5mm
▪ Battery charger 230 V
▪ 2 batteries
▪ 1 bottle micro duct lube
▪ Service kit
Optional accessories
▪ Cable inlet guides.
▪ 110/240 V power supply. No need to charge or change batteries.
▪ Table/Tripod bracket. For safe installation on working table.
▪ Jetlogger: electronic documentation system.
▪ Metal drive wheel for < 2.5 mm cable.
▪ External cable guide for V0-series case.
▪ 10 m airhose 3/8 ”.
▪ Cable seals.
▪ Jetair 100270 compressor.